The clarification is in the elimination of all kinds of particulates, sediments, oils and organic matter in the water.
Blog
FilterPress-015-0800-P
A Series Portable Mixer
Clamp or Optional Cup Plate Mount.
Features:
- No clutches to slip, wear or replace.
- Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
- Vibration-absorbing pad standard.
- Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame).
- Air motors also available.
- Gears run in grease lubrication. Cannot leak oil.
- Variable speed drives also available.
- Cast aluminum housing.
- Mounting clamp has adjustable angle of entry by indexed ball-and-socket design to achieve various process results.
350 RPM, Heavy Helicacl Gear; Grease Lube.
B Series Portable Mixer
Gear Drive Mixer, Angle Riser Mount
Features:
- No clutches to slip, wear or replace.
- Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
- Vibration-absorbing pad standard.
- Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame).
- Air motors also available.
- Gears run in grease lubrication. Cannot leak oil.
- All JGR mixer shaft bearings are permanently lubricated.
- Variable speed drives also available.
- Cast aluminum housing.
- Angle-riser mount provides a fixed 10° angle of entry.
350 RPM, Heavy Helical Gear, Grease Lube.
C Series Portable Mixer
Flange Mount with Stuffing Box.
Features:
- No clutches to slip, wear or replace.
- Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
- Vibration-absorbing pad standard.
- Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame).
- Air motors also available.
- Gears run in grease lubrication. Cannot leak oil.
- Variable speed drives also available.
- Flange stuffing box rated to 15 PSI.
- Standard mounting flange is 6″ carbon steel, 316SS optional.
350 RPM, Heavy Helical Gear, Grease Lube
R14 Series RO System
TOP quality, attractively priced, fully assembled RO systems.
Five models for flow rates to 10,800 GPD. Select the features you want to meet your requirements!
Standard features (package #1):
- Powder coated steel frame.
- Stainless steel pressure vessels.
- Low-pressure shut-off with automatic restart.
- Pre-filter pressure gauges.
- Flow meter for product water.
- Check valve for product water.
Additional features included with package #2:
- CI-1000 electronic controller with product water conductivity meter and alarm output.
- Programmable concentrate auto flush.
R48 Series Commercial RO Systems
Standard features
- Powder coated steel frame
- FRP multi-port pressure vessels
- Stainless steel pre-filter and cartridges
- Webtrol multi-stage centrifugal pump
- Automatic inlet valve
- Low-pressure shut-off with auto restart
- Tank level input
- Pretreatment interlock input
- Adjustable recycle line
- Pre-filter pressure gauges
- Pump discharge pressure gauge
- Flow meter for product, reject, & recycle water
- Check valve for product water
- Sample valves for product water
- On / off switch
Four models for flow rates up to 100 GPM.
Additional features included R48 systems:
- CI-2000 electronic controller with feed and product water conductivity meter and alarm output.
- Programmable concentrate auto flush.
R44 Series Commercial RO Systems
- Powder coated steel frame
- FRP multi-port pressure vessels
- Stainless steel pre-filter and cartridges
- Webtrol multi-stage centrifugal pump
- Automatic inlet valve
- Low-pressure shut-off with auto restart
- Tank level input
- Pretreatment interlock input
- Flow meter for product, reject, & recycle water
- Adjustable recycle line
- Pre-filter pressure gauges
- Pump discharge pressure gauge
- Check valve for product water
- Sample valves for product water
- On / off switch.
Three models and two design options for flow rates up to 30 GPM.
Additional features included with system
- CI-1000 electronic controller with product water conductivity meter and alarm output.
- Programmable concentrate auto flush.
Models
| N° | Package | GPM | Pump (HP) | Recovery (Adj) | Membrane size | Membrane Array | Feed Water (GPM) |
Typical Rejection | Dimension | Ship Weght (lbs) |
| R44-16-11110 | 1 | 20 |
10/TEFC |
65% – 75% |
4″ x 40″ |
2:2 | 31 |
98% |
192″ x 26″ x 72″ | 1400 |
| R44-16-11110 | 1 | 20 | 2:2 | 31 | 192″ x 26″ x 72″ | 1400 | ||||
| R44-16-11110 | 1 | 20 | 2:2 | 31 | 192″ x 26″ x 72″ | 1400 | ||||
| R44-16-11110 | 1 | 20 | 2:2 | 31 | 192″ x 26″ x 72″ | 1400 | ||||
| R44-16-11110 | 1 | 20 | 2:2 | 31 | 192″ x 26″ x 72″ | 1400 | ||||
| R44-16-11110 | 1 | 20 | 2:2 | 31 | 192″ x 26″ x 72″ | 1400 |
Batch Waste Water Treatment System
This batch unit will precipitate heavy metals and is good for metal finishing facilities, as well as any application that needs to adjust pH to settle out contaminants such as:
- Heavy metals.
- Alkaline metals.
Description:
- Capacities up to 30,000 liters.
- Neutralization, precipitation, flocculation, effluent filtration and sludge sent to the filter press in automatic sequence.
- PH & ORP control according to application.
- Treatment for SST, greases and oils, heavy metals, paints, etc.
- Filter press of two or four cubic feet.
- Modular manufacturing to facilitate installation.
- Final filtration of 5 microns.
Features may include:
- Mixer with Stainless Steel shaft and 304 Stainless Steel 8” impellor,
- 1 decant valve 2 True union ball valves on bottom of cone tank.
- Air Diaphragm sludge pump,
- Stair tread and deck for cone bottom tank access.
- Operations Manual in Spanish or English.
- Fully skid mounted and piped.
Full Line of Enviro Solutions Batch Type Industrial Waste Water Treatment Systems
|
Batch Type Model: BT |
Tank Size(Gal.) |
Actual Capacity (Gal) |
Tank Dim. (in.) |
S: Simplex GPM* |
D: Duplex GPM* |
|
BT-0500-X |
500 |
400 |
52 x 81 |
0.83 |
1.67 |
|
BT-1000-X |
1000 |
800 |
64 x 98 |
1.67 |
3.33 |
|
BT-1490-X |
1490 |
1192 |
64 x 132 |
2.48 |
4.97 |
|
BT-2500-X |
2500 |
2000 |
90 x 111 |
4.17 |
8.33 |
|
BT-3000-X |
3000 |
2400 |
96 x 125 |
5.00 |
10.00 |
|
BT-4900-X |
4900 |
3920 |
102 x 159 |
10.17 |
20.33 |
*GPM based on one batch per 8 hour shift. The amount of batches able to be completed in 8 hours will depend on your process.