R44 Series Commercial RO Systems

  • Powder coated steel frame
  • FRP multi-port pressure vessels
  • Stainless steel pre-filter and cartridges
  • Webtrol multi-stage centrifugal pump
  • Automatic inlet valve
  • Low-pressure shut-off with auto restart
  • Tank level input
  • Pretreatment interlock input
  • Flow meter for product, reject, & recycle water
  • Adjustable recycle line
  • Pre-filter pressure gauges
  • Pump discharge pressure gauge
  • Check valve for product water
  • Sample valves for product water
  • On / off switch.

reverse osmosis

Three models and two design options for flow rates up to 30 GPM.

Additional features included with system

  • CI-1000 electronic controller with product water conductivity meter and alarm output.
  • Programmable concentrate auto flush.

Models

Package GPM Pump (HP) Recovery (Adj) Membrane size Membrane Array Feed Water (GPM)
Typical Rejection Dimension Ship Weght (lbs)
R44-16-11110 1 20

 

10/TEFC

 

65% – 75%

 

4″ x 40″

2:2 31

 

98%

192″ x 26″ x 72″ 1400
R44-16-11110 1 20 2:2 31 192″ x 26″ x 72″ 1400
R44-16-11110 1 20 2:2 31 192″ x 26″ x 72″ 1400
R44-16-11110 1 20 2:2 31 192″ x 26″ x 72″ 1400
R44-16-11110 1 20 2:2 31 192″ x 26″ x 72″ 1400
R44-16-11110 1 20 2:2 31 192″ x 26″ x 72″ 1400

Batch Waste Water Treatment System

This batch unit will precipitate heavy metals and is good for metal finishing facilities, as well as any application that needs to adjust pH to settle out contaminants such as:

  • Heavy metals.
  • Alkaline metals.

Description:

  • Capacities up to 30,000 liters.
  • Neutralization, precipitation, flocculation, effluent filtration and sludge sent to the filter press in automatic sequence.
  • PH & ORP control according to application.
  • Treatment for SST, greases and oils, heavy metals, paints, etc.
  • Filter press of two or four cubic feet.
  • Modular manufacturing to facilitate installation.
  • Final filtration of 5 microns.

Features may include:

  • Mixer with Stainless Steel shaft and 304 Stainless Steel 8” impellor,
  • 1 decant valve 2 True union ball valves on bottom of cone tank.
  • Air Diaphragm sludge pump,
  • Stair tread and deck for cone bottom tank access.
  • Operations Manual in Spanish or English.
  • Fully skid mounted and piped.

Full Line of Enviro Solutions Batch Type Industrial Waste Water Treatment Systems

Batch Type Model: BT

Tank Size(Gal.)

Actual Capacity (Gal)

Tank Dim. (in.)

S: Simplex GPM*

D: Duplex GPM*

BT-0500-X

500

400

52 x 81

0.83

1.67

BT-1000-X

1000

800

64 x 98

1.67

3.33

BT-1490-X

1490

1192

64 x 132

2.48

4.97

BT-2500-X

2500

2000

90 x 111

4.17

8.33

BT-3000-X

3000

2400

96 x 125

5.00

10.00

BT-4900-X

4900

3920

102 x 159

10.17

20.33

*GPM based on one batch per 8 hour shift. The amount of batches able to be completed in 8 hours will depend on your process.

Filter Cloths CGR or Gasketed

To select the correct type of filter cloth to match your needs, the first step we must take is to determine the type of process or application performed by the filter press, the operating environment, and the performance required of the filter cloths.
Your process could also determine the lengh of life of your filter cloths. They could last as little as six months or as long as five years. It depends on many things such as, how often you run your filter press, what you run through your filter press and how well you maintain your filter cloths.

It’s probably time to change your cloths when you see abrasion, stretchiness, folding, holes, poor cake, dirty filtrate or when conventional cleaning techniques don’t restore the performance of your filter press.

These filter cloths come in many different materials including polypropylene, polyester, cotton, and other synthetic materials. Mesh opening or pore size is also an important consideration when selecting the proper filter cloths for a particular application.

plate-and-frame-filter-cloth-250x250

If you need to change their filter cloths of filter press, then you can download a document showing how to do it.

R13 Compact Wall Mount RO System

Description:

  • 1,200 gpd compact wall mount RO w/adjustable recovery
  • SS needle valves for concentrate and recycle lines.
  • 1/2 HP motor.
  • Brass pump.
  • Stainless steel product water check valve.
  • Low-pressure shut-off with auto restart.
  • Feed water and product water TDS monitor.

Reverse Osmosis Unit ES24